mrgmotorssales@gmail.com

Two Wheeler Tips

PRE BIKE RIDING TIPS AND INSPECTION GUIDE

TIPS FOR SAFE RIDING

Clean Surface
Clean the two-wheeler body surface regularly to maintain the surface finish. Use specifically designed cleaning products only.

Part Inspect
Thoroughly examine each of these parts in your motorcycle. They’ll go a long way in ensuring safety while riding.

FUEL SAVING TIPS

MAXIMUM MILEAGE. MAXIMUM RIDE.

Follow these guidelines and kick start an awesome journey on the road.

DO’S
  • Drive at steady speed.
  • Maintain correct tyre pressure.
  • Adjust drive chain tension correctly.
  • Get your engine tuned and motorcycle serviced regularly by a Hero MotoCorp authorised workshop.

DONT’S

  • Do not keep the clutch lever pressed while driving.
  • Do not run the engine in low gear for long times.
  • Do not park your motorcycle under direct sunlight as it causes evaporation of petrol.
  • Do not keep brake pedal pressed while riding.
  • Do not raise the engine rpm during traffic halts, switch “OFF” the engine if the halt is more than 30 seconds.
  • Do not cover inlet of air filter assembly.
  • Do not cover the engine in the front and sides. This may restrict the smooth air flow to the engine fins required for air cooling and the engine may run at a higher temperature.

In case you wish to have the fuel efficiency tested, please visit the nearest |Authorised Hero MotoCorp workshop and ask for a fuel efficiency test (KPL Test) done. Make any adjustments that are found necessary.

For Petrol Engine two/ three wheelers the current regulation requirement as follows:-

  • Idle CO (Carbon Monoxide)% = 3.0 % (Max.)
  • HC (Hydro carbon) ppm = 3000 ppm (Max.)

Vehicles which do not undergo a periodic maintenance are liable to emit exhaust gases more than the permissible limit.

Few Important tips to maintain low emission levels:-

  • Clean spark plug and maintain specified gap between electrodes.
  • keep the air filter clean.
  • Get the carburetor tuned at authorized Hero MotoCorp Workshop.
  • Do not overfill the engine oil and follow the replacement schedule.
  • Avoid use of adulterated fuel.
  • You should get the emission level certified once every 3 months at any of the authorized emission checking centres.

PUC CERTIFICATION

GET YOUR MOTORCYCLE INSPECTED

For petrol engine two – wheelers the current regulation requirement is as follows –

  • Idle CO (Carbon Monoxide) % = 3.00 % (max)
  • HC (Hydrocarbon) = 3000 ppm (max)

Vehicles which do not undergo a periodic maintenance are liable to emit exhaust gases more than the permissible limit.

Few important tips to maintain low emission levels –

  • Clean spark plug and maintain specified gap between electrodes.
  • Keep the air filter clean.
  • Get the carburetor tuned at authorized Hero workshop.
  • Do not overfill the engine oil and follow the replacement schedule.
  • Avoid use of adulterated fuel.
  • You should get the emission level certified once every 3 months at any of the authorized emission checking centers.

BIKE MAINTENANCE GUIDE

TIPS FOR SAFE RIDING

Engine oil level

engine-oil-img

Engine oil is a key determinant for efficient motorcycle performance and increased engine life. Hero 4-T Plus Genuine Engine Oil is a premium quality engine oil, engineered to meet the lubrication requirements of Hero Engines. Hero 4-T Plus conforms to International specifications of SAE 10 W 30 SJ grade specifications.

We strongly recommend that you use Hero 4-T plus to maintain optimum engine performance during extreme driving conditions.

Hero 4-T plus Genuine Engine Oil provides the following benefits compared to API SF grade oil:

How to check the engine oil level?

engine-oil-level-img

In order to check the level of the engine oil, the vehicle should be on main stand. Check the engine oil level using the dipstick. The engine oil level should be maintained between the upper and the lower level marks of the dipstick. In case it is needed, top up the engine oil up to the upper level on the dipstick.

Replace the engine oil if it is due for replacement

Battery Maintenance

Your motorcycle battery needs periodical maintenance to ensure a long and trouble free life. Do the following checks at regular intervals for a reliable battery performance.

Check the electrolyte level against the top and bottom markings on the battery shell. Always top up with distilled water whenever required.

Check for any leakage from battery. It should be clean and free from any leakages. In case of non use of motorcycle, battery should be kept fully charged and electrolyte level should be at Top mark.